5906v in 1992 Honda Accord

I do know the basics and some more information on the 92 accord wiring.


I installed my 5901 a couple years back in my other 92 accord. It went well.


I am trying to install a 5906v in my other 92 Accord but since DEI only has the quick reference install guide I am a bit lost.


On the Remote Start 10 pin heavy gauge connector



Pin        Color      Connection Accord wiring

1  NC    No connection

2    RED / black   + Fused 12v Accessory/starter input yellow wire @ignition

3    Pink/black + Flex relay input 87a key side    ???

4    Pink/white + Ignition 2 flex relay ouput      ???

5    Red        + Fused 12v Ignition 1 input      BLACK / YELLOW @ignition

6    Green       + Starter input (key side)        BLACK/ white   (cut) @ignition

7    Violet      + Starter ouput (car side)        BLACK/ white @ (cut) interior fuse panel

8    Orange      + Accessory output  ???

9    RED / white   + Fused 12v Ignition 2 flex relay   ???

10   Pink        + Ignition 1 input/output       ???




My Accord is simple I know. However these extra wires and Flex relay talk has got me stumped.


I did search around before asking and most of it was for newer cars that come with factory alarms and more options then my old car.


Thank You!

1
2, RED / black to white at ignition switch.
3, Not used.
4, Not used.
5, Red, as RED / black at 2.
6 and 7 correct.
8 Orange to yellow at ignition switch.
9, RED / white to red and RED / black as 2.
10, Pink to BLACK / YELLOW at ignition switch.
Now isn't that simple. All you need to do is to follow the reference guide and a rest light, you won't even need a meter with this car.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.