removing viper 5101A and VSMC100C
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139041
Printed Date: October 31, 2024 at 6:21 PM
Topic: removing viper 5101A and VSMC100C
Posted By: theguyman
Subject: removing viper 5101A and VSMC100C
Date Posted: June 01, 2015 at 6:05 AM
Hello: car has been written off in an accident but still driveable. Will the car still be drivable if I remove the 5101A module & VSMC100C smartstart module, so I can redeploy it in another vehicle? I will only unplug the harnesses and leave the harness with the car. Thanx!
Replies:
Posted By: howie ll
Date Posted: June 01, 2015 at 7:50 AM
Check to see if there's a starter cut, not familiar with that Viper, if there is the Viper colours are green and purple.
------------- Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: theguyman
Date Posted: June 01, 2015 at 5:28 PM
Ok I removed both modules and car still starts with the key so that is good!
Posted By: tedmond
Date Posted: June 01, 2015 at 8:26 PM
insurance would have covered it.
------------- Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
|