clifford 5906x
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139116
Printed Date: May 03, 2024 at 6:48 AM
Topic: clifford 5906x
Posted By: yamikenbuilt
Subject: clifford 5906x
Date Posted: June 24, 2015 at 4:39 AM
I removed my old alarm clifford 50.5x from my 1985 toyota corolla. Since it wasn't working anymore. I tried wiring the new alarm but the system doesn't do anything except for truck release. No remote start, no system arm/disarm. Any ideas as to what I'm missing? I labeled al.the wires before removing the old one so I did get wires mixed up. Any help is appreciated.
Replies:
Posted By: howie ll
Date Posted: June 24, 2015 at 8:09 AM
List what you've connected to where.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: yamikenbuilt
Date Posted: June 24, 2015 at 5:17 PM
Will do after I get home from work. Thanks!
Posted By: howie ll
Date Posted: June 24, 2015 at 5:18 PM
Also no listing for a 50.X do you mean 50.3X etc?
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: yamikenbuilt
Date Posted: June 24, 2015 at 5:26 PM
It's a 50.5x clifford That was the old alarm.
Posted By: howie ll
Date Posted: June 24, 2015 at 5:32 PM
My mistake. Make sure that the BLACK/ white dome supervision on the old alarm isn't confused with BLACK/ white neutral safety on the new.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: yamikenbuilt
Date Posted: June 24, 2015 at 6:13 PM
Ok. I'll double check on that one thanks
Posted By: yamikenbuilt
Date Posted: June 25, 2015 at 3:48 AM
So I just has a professional dei installer check my alarm out. He found the brain is defective. So hopefully I can get a other one and be able to hook it up with no problems.
Posted By: yamikenbuilt
Date Posted: July 06, 2015 at 2:40 PM
I returned the other alarm and got a viper 5706 instead But I had to cut and return all the old harness. Wondering if I got this right. 1986 toyota corolla gts. Starter wire blk/WHT cut and green of alarm on key side, violet on other side. Ignition blk/orange car side to red, pink, on alarm. Blk / YELLOW on car sode to orange and RED / blk on alarm. I'm not too sure on the flex relay ones
Posted By: howie ll
Date Posted: July 06, 2015 at 5:31 PM
Viper green to cut BLACK/ white key side.
Viper purple to cut BLACK/ white motor side.
Viper red and RED / black to white, constant input.
Viper RED / white to black, constant input.
Viper pink to BLACK/ orange IGN 1.
Viper pink/white to BLACK / YELLOW IGN 2.
Viper orange to blue/red ACC.
Change the antenna and antenna lead.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: yamikenbuilt
Date Posted: July 06, 2015 at 5:44 PM
Thanks! Also have a question on the 535T. It says to run a relay so the alarm will be bypassed when closing or opening windows. Which wire on sensor do you cut and use? The impact sensor has 4 wires, one which is cut already and looped.
Posted By: howie ll
Date Posted: July 06, 2015 at 5:52 PM
Don't, just leave that at present, remember to wire directly to the motor wires in each door.
Which sensors do you have?
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: yamikenbuilt
Date Posted: July 06, 2015 at 7:12 PM
So I shouldn't wire in a relay and just connect to aux channel and orange ground when armed wire to 535t? I have the impact sensor that comes with alarm and the 508d motion sensor. I want to be able to arm and leave windows down and roll up when I want if possible. I had the 530t hooked up where it would roll up when alarm is armed and aux chanel.to vent or roll down only.
Posted By: howie ll
Date Posted: July 07, 2015 at 2:26 AM
Neither of those sensors are active until about 20 seconds after arming so not relevant.
Try activating the windows during remote start, see if that triggers if so you need to cut the power supplies red or grounds black to each sensor.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|