Problem with Alarm Clifford 420.4x
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139161
Printed Date: May 08, 2024 at 11:19 PM
Topic: Problem with Alarm Clifford 420.4x
Posted By: danielomar
Subject: Problem with Alarm Clifford 420.4x
Date Posted: July 05, 2015 at 9:15 AM
Hi everyone!
I recently bought a clifford alarm (model 420.4x), is installed and all wiring is properly connected; the problem is that when the alarm is activated and open a door alarm is not activated no flashing lights , no siren sounds. I don´t know if I have to make some programming to activate that function.
I read the manuals (phyton 424, clifford 420.4x, viper 4204) , 2 alarm technicians checked me and everyone says that the alarm is well connected but no response when the alarm is activated.
Replies:
Posted By: howie ll
Date Posted: July 05, 2015 at 9:41 AM
Is the unit connected to a door trigger, what vehicle, make model, year?
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: danielomar
Date Posted: July 05, 2015 at 10:12 AM
sorry forgot the car information, Kia Rio 2016, and yes the unit is connected to a door trigger
Posted By: howie ll
Date Posted: July 05, 2015 at 11:02 AM
Green wire from H2?
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: danielomar
Date Posted: July 05, 2015 at 11:11 AM
The green wire from h2/6 is connected and the violet h2/12.
It is connected and tested
Posted By: howie ll
Date Posted: July 05, 2015 at 11:25 AM
Check voltage between any input fuse and your grounding point.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: smokeman1
Date Posted: July 05, 2015 at 6:33 PM
If you have a 420.4x, it is a remote start/keyless entry unit.
No alarm features. Was a siren included with the kit?
-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
Posted By: danielomar
Date Posted: July 05, 2015 at 7:36 PM
No the siren wasn't included with the kit.
Then is there no alarm features?
Posted By: smokeman1
Date Posted: July 05, 2015 at 7:43 PM
Remote start/keyless entry only. No alarm.
Nice units. Good range, reliable.
My wife has had the Viper brand in her Corolla for over 6 years.
Never had a problem.
-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
Posted By: danielomar
Date Posted: July 05, 2015 at 8:30 PM
itself has very good specifications, I bought it thinking that alarm worked well, but it only works me like central locking because where the installed the technical know nothing about remote start.
Well, thanks you (howie ll & smokeman1), That solves the problem of alarm function. 
|