Viper 5706v + dball2 will not arm in silent mode
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139195
Printed Date: April 28, 2024 at 7:18 AM
Topic: Viper 5706v + dball2 will not arm in silent mode
Posted By: kevinthien
Subject: Viper 5706v + dball2 will not arm in silent mode
Date Posted: July 13, 2015 at 5:37 PM
hey guys, i tried using the search function and it looks like one person had the same issue, but i can't view the thread.
anyways i have a 2012 toyota camry, with the smartkey, db all2 on the viper 5706v.
the alarm was working fine, but i noticed recently the silent arm (level 4) is not working properly.
basically when i try to arm in full silent ( level 4) the sound icon shows up and says FULL SILENT, then it says ARMED. and the sound icon goes away. there wasn't a second chirp on my car or anything.
i tried disconnecting the battery, but it didn't not solve anything.
does anyone have any suggestions? i would truly appreciate it.
Replies:
Posted By: kevinthien
Date Posted: July 14, 2015 at 9:13 PM
https://www.youtube.com/watch?v=BAYwJQyVSNU
heres a video i recorded
Posted By: kevinthien
Date Posted: July 15, 2015 at 8:21 PM
i did soem trouble shooting with a friend in hawaii (who is a authorized direct tech) we tried reflashing the dball2, disconnected both sensors, we notice today that the level 2 (valet mode) when trying to arm on the remote, it says "not avail"
also when i arm the car, sometimes it chirps 3 times instead of two.
Posted By: kevinthien
Date Posted: July 15, 2015 at 10:52 PM
sorry for so many posts, i dont see an edit button. but after playing with my alarm around, i have come to figure out that when arming in valet mode, i need to arm the car first, then try to arm in level 2.
same issue as in the video. so it looks like levels 2-4 i cannot correctly arm in those levels. it just "rearms"? ARMED in the regular black lock.
so we reflashed the dball2, i checked all the wirings, still the same issue. i dont know what else to try besides resetting the viper brain itself. (not sure how to do that)
but basically i was working on the door speakers of my car, i disconnected the battery because i didn't want it to drain from leaving the door open. could that may have triggered the issue?
|