Trunk Trigger-Viper 550 ESP

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=1392
Printed Date: May 09, 2024 at 9:33 PM

Topic: Trunk Trigger-Viper 550 ESP

Posted By: sador
Subject: Trunk Trigger-Viper 550 ESP
Date Posted: June 19, 2002 at 10:37 AM

Hi Everybody!!

My question is Can I use the same Door tigger wire of my alarm with my trunk trigger?or I have to use another wire of any especial connection?

Thank You!

Replies:

Posted By: install_tech
Date Posted: June 19, 2002 at 10:50 AM

Yes, you can use your door trigger wire if it is a negative system. use diodes to keep the circuits isolated.

If I am not mistaken, your alarm should have a wire for an instant trigger. If so , use it instead. Your alarm divides triggers and sensors into zones. If your alarm is triggered while you are away, the alarm can inform you by flashing the LED or parklights to let you know what was triggered.example, trunk, doors, shock sensor, ect.

Hope this helps.

-------------
install_tech

Posted By: sador
Date Posted: June 19, 2002 at 9:09 PM

Thank install_tech

This alarm has a wire (-) for an optional sensor can I use this for my trunk trigger (-)? and this alarm inform by flashing the led to let me know what was triggered.

Print Page | Close Window