Viper 5706v Unlock Issues
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139275
Printed Date: May 01, 2024 at 8:06 PM
Topic: Viper 5706v Unlock Issues
Posted By: erod998
Subject: Viper 5706v Unlock Issues
Date Posted: August 05, 2015 at 8:14 PM
Hey everyone, I will try and keep this short and quick.
So, my remote start on my 2012 Tacoma works fine except for...
My unlock. If the car is remote started then unlocked it will unlock, or if a door is open I can lock/unlock all day long. But if the doors are shut, locked, and not remote started, it will not unlock. What should I do?
Replies:
Posted By: kreg357
Date Posted: August 07, 2015 at 5:01 PM
Not sure where you have the Viper's lock wires connected to right now, but...
Try switching the Viper's (-) Unlock output wire to this wire :
GREEN/ Black (driver door key unlock) double (-) @ driver kick, gray 10 pin plug, pin 8
Also program the Viper for a double unlock pulse output ( Menu 1, Feature 6, Option 2 ).
-------------
Soldering is fun!
|