Print Page | Close Window

2013 Chrysler Town and Country, Python 5706

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139335
Printed Date: May 03, 2024 at 6:08 AM


Topic: 2013 Chrysler Town and Country, Python 5706

Posted By: 507 w
Subject: 2013 Chrysler Town and Country, Python 5706
Date Posted: August 21, 2015 at 2:45 PM

Hello, I want to install a python 5706 on my Chrysler town and country 2013. What bypass module do I need? And where do I get that information? Thank you

-------------
The Broken Link



Replies:

Posted By: kreg357
Date Posted: August 22, 2015 at 8:34 PM

I can recommend either the ADS AL-CA from iDatalink or the EVO-ALL from Fortin.  I have used both with excellent results.

Here is a link for the iDatalink info :  https://www.idatalink.com/support

Here is a link for the Fortin info :  https://fortin.ca/en/

You didn't mention if the van had Push To Start or plastic key.  If you are planning to connect the bypass module to the Python with the D2D harness, you will need to get a special version of firmware flashed onto the iDatalink or Fortin module that requires the use of their flash USB cable.

My current work van is a 2013 Dodge Caravan without PTS.  Running an Avital 4113 with an EVO-ALL in W2W mode.  Here is a link to the Pictorial :  https://www.the12volt.com/installbay/forum_posts.asp?tid=134484



-------------
Soldering is fun!



Posted By: 507 w
Date Posted: August 28, 2015 at 7:00 AM
Thanks

-------------
The Broken Link


Print Page | Close Window