Print Page | Close Window

2015 tacoma alarm suggestions

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139349
Printed Date: April 29, 2024 at 2:06 AM


Topic: 2015 tacoma alarm suggestions

Posted By: yositoco
Subject: 2015 tacoma alarm suggestions
Date Posted: August 23, 2015 at 9:23 PM

I'm looking for suggestions on for a 2-way alarm. I'm inclined into getting a 5706v with dball2. After doing research the dball2 doesn't have the 2015 tacoma as a compatible application. Anyone has experience with this setup?

Also, would like to hear your thoughts on what other alarms are out there similar or better than the 5706 in that price range.




Replies:

Posted By: stanward
Date Posted: August 26, 2015 at 8:45 PM
I used to love Clifford alarms long ago (G5 technology), but recently installed the 5706V in my Infiniti.

Programming the 5706V is best done with the Bit Writer, which is pretty affordable. Wiring the 5706V is a bit tricky, as Viper doesn't provide solid wiring information (as they did with older products long ago).

I don't have any experience with factory chip-in-key bypass modules. Sorry, can't help you there.




Posted By: yositoco
Date Posted: August 26, 2015 at 9:20 PM
stanward wrote:

I used to love Clifford alarms long ago (G5 technology), but recently installed the 5706V in my Infiniti.

Programming the 5706V is best done with the Bit Writer, which is pretty affordable. Wiring the 5706V is a bit tricky, as Viper doesn't provide solid wiring information (as they did with older products long ago).

I don't have any experience with factory chip-in-key bypass modules. Sorry, can't help you there.


Thanks for the comment. I will look into Bit Writer




Posted By: stanward
Date Posted: August 27, 2015 at 7:32 PM
You can get Viper/DEI stuff off of Amazon very cheap, including the Bit Writer.

To learn how to do the wiring, this is the best forum to do so (maybe you can consult with Toyota Tacoma forums as well) as I mentioned before that Viper/DEI does not provide detailed information on how to install (to keep their installers happy).

It may also help if you can find the Factory Service Manual for your Tacoma. This will aide in installation.





Print Page | Close Window