runtime dip switches

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139510
Printed Date: May 04, 2024 at 8:43 AM

Topic: runtime dip switches

Posted By: bush bunny78
Subject: runtime dip switches
Date Posted: October 02, 2015 at 7:59 PM

Hello , I'm looking for some info on what dip swithes need flipped in order to set run time, I've tried to do it through my remote but does not respond, current run time is set to 8 minutes and would like to set it up to 18 mins.

Remote is a j5f-tx2000 , i did snap a pitcure of the unit itself but if anyone has a maual for this unit it would be greatly appreciated. Again just need to know the procedure on runtime on the swithes or a maual.
posted_image

What brain do i have. Says MV on the unit.

-------------

Replies:

Posted By: bush bunny78
Date Posted: October 05, 2015 at 12:10 AM

Any reason why my remote won't let me access any settings to someone box? It will start with the remote and stop, panic button works fine so i belive the only way to set my run time is from the dipswitches on my astrostart, maybe it's an older model but on the box it looks like it was from feb 2006.

I also got told that my unit is a 2106 model. Any info from someone who has installed these would be a blessing , it's getting colder 🚘

Print Page | Close Window