Bit Writer Programming
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139516
Printed Date: April 28, 2024 at 10:55 PM
Topic: Bit Writer Programming
Posted By: stanward
Subject: Bit Writer Programming
Date Posted: October 04, 2015 at 1:17 AM
Hello,
I have a question in regards to programming my 5706V alarm with the Bit Writer.
After successful programming, a month later, I want to change one setting for sensor 2 icon. I did a "Read" first with the Bit Writer. I noticed as I am scrolling thru the menu, some of the options has changed to default (when previously changed to a different setting).
Why is this?
Does this mean if I want to make small edits here and there, I need to remember the changes that I want and re-do all of them?
Stan
Replies:
Posted By: howie ll
Date Posted: October 04, 2015 at 1:55 AM
Yes.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|