Clifford Remote Start cranks only for a second
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139522
Printed Date: April 30, 2024 at 2:20 PM
Topic: Clifford Remote Start cranks only for a second
Posted By: king6fab
Subject: Clifford Remote Start cranks only for a second
Date Posted: October 04, 2015 at 7:40 PM
Hello everyone, new here. Joined up to figure out this problem I have on a newly acquired nissan Titan. Im pretty good with electrical so im up to the challenge.
The problem I have is with a Clifford 7752X, Everything works on it, except the Remote Start, When I push the start button, the lights come on, and it cranks for a second, then stops 30-40seconds later it will crank for a second again, then stops. Obviously this isnt long enough to start the truck.
Now heres where the funny part comes in, If I put the key in the ignition, turn it to ON, then turn it to off and pull the key out, push the remote start, it fires right up.
What gives?
Also a video of it in action
https://youtu.be/PO-hJrHqJ2U
Replies:
Posted By: howie ll
Date Posted: October 05, 2015 at 1:36 AM
Failed OEM immobiliser by-pass.
You also need to test the R/S outputs, You need I believe 2 start and 2 ignition wires, check to see that they are all powered up during R/S.
Also obviously check voltage from all fuses to your grounding point.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: king6fab
Date Posted: October 05, 2015 at 9:43 PM
OEM immobiliser, I havent had a chance to check wires as of yet..working late lately. However heres a good question, would using the OEM secuirty remote cause a problem with this? I bought the truck from a dealer that got it as a trade in, when I asked about the remote start they threw their hands in the air.. I assume it worked for the original owner, maybe the dealer used the Oem remote messing it up?
Posted By: howie ll
Date Posted: October 06, 2015 at 1:00 AM
Unlikely.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|