Viper SmartStart No Green LED/Function Test
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139715
Printed Date: May 04, 2024 at 6:11 AM
Topic: Viper SmartStart No Green LED/Function Test
Posted By: charbaugh
Subject: Viper SmartStart No Green LED/Function Test
Date Posted: November 12, 2015 at 8:39 PM
Wrapping up the install of a SmartStart on my '13 F250. The SmartStart is tied into a 5X10 module using the included harness, and I have the grey wire grounded. However, I'm not able to get a green LED. Also, I went through the process of activating so I could test the app for GPS tracking. Now the directechs.com site won't let me back into the activation to further test the functions. Is there a way to get back to the test web site after activation?
-------------
Clark Harbaugh
Replies:
Posted By: rs specialist
Date Posted: November 16, 2015 at 11:18 AM
Once the system is activated you can no longer get into the system only DEI can.
Doesn't Green mean that it is communicating with the brain of the RS? If so, it is not seeing the brain. I would try unhooking the ground to the grey wire then power cycling the smart start.
|