Print Page | Close Window

'12 Maxima remote start problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139727
Printed Date: May 03, 2024 at 11:30 PM


Topic: '12 Maxima remote start problem

Posted By: armbruster
Subject: '12 Maxima remote start problem
Date Posted: November 14, 2015 at 7:24 PM

I have a Maxima that I installed a Python 4104P with Smart Start using a DBALL2 in D2D and the system keeps dropping the remotes and stops working. I can reprogram the remotes and it will work for a week or so and then drops the remotes again.

I have replaced the RS and DBALL twice with the same result...tried W2W even with no luck. Looking for any suggestions



Replies:

Posted By: shark mobile
Date Posted: November 15, 2015 at 9:45 PM
I know it sounds silly but find a new ground...bad ground will cause all sorts of oddities...and since you replaced the units it has to be a wiring issue...drivers kick is usually a decent place...cheers

-------------
Solder, tape, repeat!




Print Page | Close Window