ProStart Remote Car Starter stop working
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139730
Printed Date: April 28, 2024 at 10:13 PM
Topic: ProStart Remote Car Starter stop working
Posted By: mgmjtech
Subject: ProStart Remote Car Starter stop working
Date Posted: November 15, 2015 at 7:54 PM
Just replaced my car battery and now my remote starter stop working.
I have a prostart CT-3471 TW on a honda civic (manual transmission)
I was able to get my lock and unlock button working again by
getting into the program mode
ground the grey wire to the metal
turn the key on and off
press and hold the brake pedal
press lock
however, my start remote button still not working. I have seen other forum indicated you have to start the engine in order to program your remote to work again. Please advice how do I reprogram my start button to work again.
https://www.prostartsystems.com/Docs/CT-3471TW_ig_en_h50s40_121105.pdf
Replies:
Posted By: shark mobile
Date Posted: November 15, 2015 at 9:34 PM
Try reprogramming the tach...if the locks are working the remote ms are programmed..
-------------
Solder, tape, repeat!
Posted By: mgmjtech
Date Posted: November 18, 2015 at 7:09 PM
reprogram the tach and still doesn't work.
i have also reset the module. Is there a specific steps to reprogram the tach?
Posted By: shark mobile
Date Posted: November 19, 2015 at 7:25 AM
Test the tach wire you tagged using the AC voltage on you DMI and make sure you have the right wire. It should be around 1.3 volts or so but the important thing is that when you press the accelerator it increases. Start by making sure it's right before going further.
-------------
Solder, tape, repeat!
Posted By: howie ll
Date Posted: November 19, 2015 at 10:39 AM
Test all the fuses, it might have spiked.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|