2007 jeep patriot, aps997e
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139748
Printed Date: April 27, 2024 at 5:10 PM
Topic: 2007 jeep patriot, aps997e
Posted By: bat9905
Subject: 2007 jeep patriot, aps997e
Date Posted: November 19, 2015 at 11:07 PM
Hi Gonna be doing a 07 Jeep Patriot with aps997e . I'm currently planning to use flcan . Kind of confused by idatalink Iguide page 13 . Can anyone tell me if opening up ignition to solder wires refers to my install? https://cdncontent2.idatalink.com/corporate/Content/Manuals/DL-CH5/ADS-AL(DL)-CH5-EN_20150410.pdf
-------------
bat9905
Replies:
Posted By: lgammel
Date Posted: November 20, 2015 at 3:08 AM
You will have to open it up to read the serial number ( step 2)
"Locate the serial number on your circuit board. If the number
is equal to EZS NCV3 DODGE as shown below, proceed to step 3 (soldering the wires).
WARNING:
IF THE SERIAL NUMBER DOESN’T MATCH, DO NOT
PROCEED WITH MODIFICATION AND CALL TECHNICAL
SUPPORT FOR FURTHER ASSISTANCE. "
Sixer
Posted By: bat9905
Date Posted: November 20, 2015 at 8:40 AM
Ok so this is a required step . I've never done something like this. Is this common practice with mopar vehicles . It doesn't really describe what it purpose is .
-------------
bat9905
Posted By: lgammel
Date Posted: November 20, 2015 at 11:02 AM
Sorry I am not familiar with this system, just read what it said on the box. have you opened it up to see what serial no is there???
sixer
-------------
2006 Subaru forester lifted,skid plates, dual batts,winch,inverter etc.
Posted By: bat9905
Date Posted: November 20, 2015 at 6:16 PM
Ok so from what I understand it isn't needed anymore . Thanks for the help
-------------
bat9905
|