Installing RS, found aftermarket alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139758
Printed Date: April 28, 2024 at 9:37 AM

Topic: Installing RS, found aftermarket alarm

Posted By: figureitout
Subject: Installing RS, found aftermarket alarm
Date Posted: November 21, 2015 at 9:41 PM

I've got a 2012 Tacoma in the shop, trying to install a Code Alarm 5054. Costumer thought it was a factory alarm but there's t-taps everywhere in here. Blinking light on bypass is telling me it's good, all main outputs are correct, but it just won't start. When I key start it in remote start, it'll stay running when I remove the key. Anyone able to point me in the right direction?

Replies:

Posted By: figureitout
Date Posted: November 22, 2015 at 12:08 AM

Never mind, I got it. Just took some staring, cross referencing different wiring diagrams, more staring, and testing. I'm quite new to this and was beginning to doubt my adventure down this path, I'm glad I stuck it out. Now if I can just get my install times under eight hours I'll be alright.

Print Page | Close Window