2013 Chevy Express Van Security/RS

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139760
Printed Date: May 02, 2024 at 4:04 PM

Topic: 2013 Chevy Express Van Security/RS

Posted By: shadowinfector
Subject: 2013 Chevy Express Van Security/RS
Date Posted: November 22, 2015 at 7:55 AM

I am installing a Crimestopper SP402 with a ADSALCA - D2D- flashed with GM-10, i dont really do GM vehicles that much....the Starter wire says for (starter kill only), so im assuming i dont hook up the starter wire to this.

Starter purple (for starter kill only) + starter or underhood fuse box, lt. gray 56 pin plug, pin E1

Do i hook a starter wire up at all? or do i have to go under the hood at the fuse box to get the starter wire.
or dont hook it up and the data module takes care of that?

I am doing this in the next couple hours
Thanks for your responses.

Replies:

Posted By: shadowinfector
Date Posted: November 22, 2015 at 7:57 AM

also, second starter wire is not used im assuming since im using a bypass module? thsnks in advance

Posted By: shadowinfector
Date Posted: November 22, 2015 at 11:10 AM

anyone?

Posted By: prdjr165
Date Posted: November 22, 2015 at 1:40 PM

looks like no start wier required-MODULE CONTROLS MULTIPLEX CIRCUIT BY DATA,
NO ADDITIONAL RELAYS OR RESISTORS REQUIRED.

Posted By: shadowinfector
Date Posted: November 22, 2015 at 4:48 PM

thanks....actually just finished and tested without.

Print Page | Close Window