Print Page | Close Window

auto lock wiring.

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139771
Printed Date: May 04, 2024 at 12:13 AM


Topic: auto lock wiring.

Posted By: gomotomoto
Subject: auto lock wiring.
Date Posted: November 24, 2015 at 9:11 AM

I purchased a simple remote central lock system and having trouble getting power to the door actuators.

Originally, they were working (actuators are new) and hooked up to an alarm system that has been removed. The door actuators are still in place. All four door actuators seem to be going into a pigtail and I see a blue and a green lead that was cut.

I know the black and red wires go to my battery (and I hear them getting power and responding to the remote) but I can not figure out which wires to use from the harness to power the actuators.

Can anyone lend a hand?

posted_image



Replies:

Posted By: gomotomoto
Date Posted: November 24, 2015 at 9:12 AM
this is what I bought:

https://www.amazon.com/gp/product/B006QH9C5A?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00




Posted By: smokeman1
Date Posted: November 24, 2015 at 3:14 PM
Try putting the White to the Blue lead, WHITE/ Black to the Green lead.
Yellow and Yellow/Black to chassis ground

-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation





Print Page | Close Window