Voltage latching switch

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=140646
Printed Date: April 28, 2024 at 9:53 PM

Topic: Voltage latching switch

Posted By: enoxos
Subject: Voltage latching switch
Date Posted: January 13, 2016 at 9:17 PM

hello everyone,
I would like to make a voltage switch that opens (OFF) the circuit when the voltage drops below 10.5 Volts and stay on the OFF position regardless on whether the voltage goes above 10.5 Volts again. I should be able to reset it with a reset bottom. Is there anything like that either ready made or a schematic that I can put to use?
thanks

Replies:

Posted By: tonanzith
Date Posted: May 22, 2016 at 7:24 PM

honestly i would look into using an arduino/raspberry pi. it would allow programming the parameters that your looking for. not a novice venture but the first thing that comes to mind and would definitely work.

-------------
Gary Sather

Print Page | Close Window