Viper Alarm, ’08 Ram 1500
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=140663
Printed Date: May 20, 2024 at 3:49 AM
Topic: Viper Alarm, ’08 Ram 1500
Posted By: gred5649
Subject: Viper Alarm, ’08 Ram 1500
Date Posted: January 15, 2016 at 3:50 PM
Hi Im new to this forum I have a 08 Ram 1500 and would like to know exactly all I would need for a viper alarm install with possibly SST or is it worth it installing it, ie: relays and do I need dball2 I was told by audio express I did. Where can I get them.
Another question--
Is it hard to install this?
Thanks any help would be appreciated
-------------
Gary
Replies:
Posted By: dairyboy3
Date Posted: January 15, 2016 at 6:05 PM
The only thing you would really need the DBALL2 for is if our doing a remote start with alarm. But you can use it for convenience features if you are doing a regular alarm without remote start. If you are doing a regular alarm you will need a 451m and some resistors for the door locks and negative parking lights.
Posted By: dairyboy3
Date Posted: January 15, 2016 at 6:15 PM
Plus diodes to isolate the door triggers unless you just use the dome light wire. The last sentence in my post above plus this was if you are doing a regular alarm without the DBALL2. If you decide to use the DBALL2 with a regular alarm it will take care of all door triggers and door locks but you will still need a resistor for negative parking lights.
|