Print Page | Close Window

Lost transmitter for remote starter 4x03

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=140724
Printed Date: May 02, 2024 at 11:50 PM


Topic: Lost transmitter for remote starter 4x03

Posted By: yogi19622002
Subject: Lost transmitter for remote starter 4x03
Date Posted: January 25, 2016 at 9:43 AM

Hello

I purchased a used car but the dealer did not give me the remotes.  I looked under the dash and found a remote starter box DEI 4x03 and a bypass module Audiovox FLCAN.  My question is how can I figure out what is the correct transmitter to use with this system(Viper,Python Avitial …)?  It was installed in 2012-2013.  Can I open the DEI 4x03 and look for a frequency? Should I buy another DEI 4x03 with remotes and just replace the one that is in there.  I found one that matched all of the connectors an Avitial 4113LX but I do not know if I will then need to reflash the FLCAN?

 

Thanks



Replies:

Posted By: chev104275
Date Posted: January 25, 2016 at 10:44 AM
I would search for a avital 4103 remotes

-------------
If i Can't Install it    I Don't need it   Joe




Posted By: smokeman1
Date Posted: January 25, 2016 at 11:05 AM
Can you post a photo of the antenna? Hopefully it is up on the windshield somewhere.

Looks like it might be a Avital 4103.


-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation




Posted By: yogi19622002
Date Posted: January 25, 2016 at 3:38 PM
The antenna is labeled HX Plus. I will try to post a picture.




Posted By: beegbie
Date Posted: January 25, 2016 at 6:39 PM
Sounds like you just need remotes. The only question is if you should buy one button https://www.amazon.com/Remote-Bundle-Automate-1-button-Replacement/dp/B0177D85AE/ref=sr_1_1?s=grocery&ie=UTF8&qid=1453768547&sr=8-1&keywords=automate+one+button+remote

Or 4 button   https://jet.com/product/detail/a5bc35ea86ef478d9ef9ea20d2aaa885?jcmp=pla:ggl:badnj_vehicles_parts_a3:badnj_vehicles_parts_a3:na:na:na:na:na:2&code=PLA15&k_clickid=074c600c-a992-43f5-af42-25402d7bced6&abkId=403-887687&gclid=CO623r6exsoCFYEfHwodRZgOpw

What kind of car is it?




Posted By: smokeman1
Date Posted: January 25, 2016 at 6:59 PM
The Avital 4103 install manual lists HX antenna in it.
Doesn't list it as HX Plus though

After some quick research looks like a 474L remote might work with your setup. Can be found on e-bay for 10-15 bucks.
Just my best S.W.A.G. (Sophisticated Wild Ass Guess)

-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation




Posted By: yogi19622002
Date Posted: January 26, 2016 at 1:44 PM
Thanks for the help. I ordered a 4113lx one button remote starter. This way I can try the remotes and if they do not work I have the remote starter box that has the exact same connectors as the 4x03. I posted a photo of the antenna but it did not show up.




Posted By: yogi19622002
Date Posted: January 26, 2016 at 1:56 PM
I will order the 4 button too. Hopefully I do not need to reflash, I would rather try 2 different remotes first. I ran a status chec on the rs it blinked 4 times. Which indicates transmitter shutdown.




Posted By: smokeman1
Date Posted: January 26, 2016 at 3:23 PM
I would pair up the remotes to the remote starter before tinkering with anything else.

Do you see or did you find the valet button? You will need to access that in order to pair the remotes.

-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation




Posted By: yogi19622002
Date Posted: January 26, 2016 at 4:33 PM
Yes I have removed the trim to expose the RS and bypass module. I readup on how to delete the old ones and add the new ones. The RS is working since I was able t get a status out of it using the valet switch. The bypass LED also lit when I pushed the button on the unit.

Thanks




Posted By: yogi19622002
Date Posted: January 29, 2016 at 4:08 AM
Thanks for the help. I received a 7111L transmitter. I programmed it into the 4x03 and I was able to start the car. Thanks again.





Print Page | Close Window