viper 5706v and 2000 honda oddysey
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=140834
Printed Date: May 03, 2024 at 10:33 AM
Topic: viper 5706v and 2000 honda oddysey
Posted By: ahlfan
Subject: viper 5706v and 2000 honda oddysey
Date Posted: February 11, 2016 at 7:11 AM
can someone double check the heavy 10 pin wiring connections according to the 2000 Honda odyssey, I have lock/unlock commands but have a remote start error and cannot enter the programming function (no siren chirp) my question relies heavily on the use of the red,red white, and pink, pink black wires. thanks!
Replies:
Posted By: dairyboy3
Date Posted: February 11, 2016 at 12:00 PM
Lock and unlock will work as long as the small red 12v wire is hooked up. Reason you can't program sounds like you don't have the thick gauge pink hooked up to ignition since you have to turn the key to ignition then off for programming with the valet.
Connections to make at ignition harness from heavy gauge harness
All heavy gauge red wires go to the white constant wire.
Connect pink to BLACK / YELLOW.
Pink/white to yellow which is second ignition
Orange to WHITE/ black which is accessory
Green to key side of BLACK/ white starter wire
Purple to starter side of BLACK/ white starter wire.
|