5103L Losing ability to R/S after one day
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=140837
Printed Date: May 05, 2024 at 5:26 PM
Topic: 5103L Losing ability to R/S after one day
Posted By: xtac1080
Subject: 5103L Losing ability to R/S after one day
Date Posted: February 11, 2016 at 4:28 PM
Installed a 5103L & DB-ALL2 for a friend into a '15 Rogue Select on Monday and he called the next day to say that it wouldn't remote start. He brought it in and sure enough everything worked but remote start. Diagnosing yielded nothing of use. Re-checked all the connections I made, everything was solid. Tried triggering the activation input with no luck. I unplugged the 12-pin primary harness and plugged it back in, and viola it began remote starting again. I foolishly assumed it was a fluke and sent him on his way since it was working. Got the same call the following day. It worked that night and the next morning, but not the following evening.
I have him dropping by this Saturday and was wondering if any of you have run into this type of problem before. I'm at a loss for what could need to be causing such an anomaly (aside from the 5103 being defective). Any ideas on where to start?
Replies:
Posted By: beegbie
Date Posted: February 11, 2016 at 8:38 PM
tb-118 from directed explains this. A shutdown diagnostic check would confirm though. If a shutdown diagnostic reveals hood pin as the culprit, hardwiring PURPLE / white from the remote start to the PURPLE / white on the db-all will fix the issue.
Posted By: xtac1080
Date Posted: February 12, 2016 at 11:34 AM
Thanks for the quick and helpful reply beegbie. I just read that tech tip. I'll give it a shot and report back for anyone else with a similar issue.
|