5706v, dball2, and 06 Silverado dmax auto start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=141103
Printed Date: June 09, 2024 at 12:33 AM

Topic: 5706v, dball2, and 06 Silverado dmax auto start

Posted By: mattearly
Subject: 5706v, dball2, and 06 Silverado dmax auto start
Date Posted: March 29, 2016 at 6:49 PM

Hi everyone! I've been using this forum here and there for many a things however I'm to a point where I can't seem to Google up a solution to my problem. My problem is when my viper module is connected to the 6 and 10 pin connectors the unit will start my pickup and regardless of what I do it won't turn off unless I unplug either one or both of those connectors. The viper unit isn't completely hooked up (missing a couple of wires on the 24-pin harness), but it is connected to the dball2 which is properly flashed (did it myself). The devices all worked up to a point, after it just does this. I could lock/unlock the doors change to valet mode etc. The control center no longer will flash a blue light (I checked the wire to the viper unit for continuity) and I'm stuck! Any help would be greatly appreciated! The unit is wired and doublr checked according to this. This is my first post so I'm ready for any feedback as well. Thanks again

-------------
06 Silverado 2500HD Lbz with EFI Live from Idaho Rob

Replies:

Posted By: mattearly
Date Posted: March 31, 2016 at 10:44 PM

So I switched to w2w mode and got everything hooked up. Still autostarts when I turn the key to the on position. No communication with remote and no light on the control center. Blown unit maybe?

-------------
06 Silverado 2500HD Lbz with EFI Live from Idaho Rob

Posted By: kreg357
Date Posted: April 01, 2016 at 5:32 AM

Have you tried pulling all the Viper fuses ( especially H1/1 Red ) and waiting around 10 minutes. That seems to "factory reset": some Vipers systems that are doing strange things.

BTW - that link to the Escalade wiring looked to be W2W besides being for a FLCAN bypass module instead of your DB-ALL2.

-------------
Soldering is fun!

Posted By: mattearly
Date Posted: April 01, 2016 at 6:54 PM

Wow thanks! Got it!!

-------------
06 Silverado 2500HD Lbz with EFI Live from Idaho Rob