Print Page | Close Window

no trunk release output on viper 4105v

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=141109
Printed Date: May 09, 2024 at 1:13 AM


Topic: no trunk release output on viper 4105v

Posted By: brianmcash
Subject: no trunk release output on viper 4105v
Date Posted: March 31, 2016 at 4:34 PM

HAVE A VIPER 4105V. INSTALLED IN 88 CAMARO. HAVE INSTALLED RELAY AT THE HATCH RELEASE BUTTON. POWERED RELAY WITH THE RED / BLACK WIRE. WHEN PRESSING AND HOLDING AUX BUTTON NOTHING HAPPENS. I CHECKED FOR POWER ON WIRE. NONE.

-------------
Brianmcash



Replies:

Posted By: smokeman1
Date Posted: March 31, 2016 at 6:03 PM
What wires, do you have on what pins, of the relay?

-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation



Posted By: howie ll
Date Posted: April 01, 2016 at 4:44 PM
DEI uses RED / white NEG not RED / black.
Follow Smokeman's suggestion.


-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.


Print Page | Close Window