Basic alarm install, 2007 4runner SR5
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=141174
Printed Date: May 03, 2024 at 3:41 AM
Topic: Basic alarm install, 2007 4runner SR5
Posted By: jonb2
Subject: Basic alarm install, 2007 4runner SR5
Date Posted: April 16, 2016 at 3:15 PM
Hi. Looking to install a basic DEI alarm system on 2007 4runner SR5 which came with only keyless entry (no factory alarm). No remote start at this time. Probably going with Viper or Avital but not set on one yet.
Does anyone know which wires on the alarm system will need to be connected as I know there will be many wires which may not be needed.
thanks for any help!
Replies:
Posted By: jonb2
Date Posted: April 17, 2016 at 7:54 PM
I think i figured out most of the wires I will need after doing some more research.
One other question. Do I need to hook up the starter kill relay or can I leave that out of the install?
thanks.
Posted By: geepherder
Date Posted: April 18, 2016 at 8:09 AM
It's a theft deterrent feature. If someone forces the ignition switch to turn (or turns with the key), the starter kill will prevent the starter from engaging if the alarm is armed.
If you don't care about this feature, you can leave it disconnected.
-------------
My ex once told me I have a perfect face for radio.
Posted By: jonb2
Date Posted: April 18, 2016 at 10:17 AM
great thanks!
|