Print Page | Close Window

Ground when armed

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=141545
Printed Date: April 28, 2024 at 9:13 AM


Topic: Ground when armed

Posted By: dporter7
Subject: Ground when armed
Date Posted: July 25, 2016 at 7:53 PM

I have a 2002 Lincoln Ls 3.9v8. I am installing a voice module add on and I need to know Where is the ground when armed output wire location and color of the factory security system and warn away trigger wire? Thanks!

-------------
D. Porter



Replies:

Posted By: lurch228
Date Posted: July 25, 2016 at 8:36 PM
Typically those wires are part of aftermarket alarms. On DEI the ground when armed is orange and the warn away is triggered by the shock sensor. Doubt the factory has a shock sensor unless its a factory installed aftermarket system.




Posted By: dporter7
Date Posted: July 25, 2016 at 9:54 PM
s a factory system. This would be the first time an after market system will be installed. The car don't have a shock system installed. Where can I find the orange wire? Is it under the steering wheel,the door module or the driver side fem?

-------------
D. Porter




Posted By: dporter7
Date Posted: July 25, 2016 at 9:56 PM
I meant to say its a factory system. This is the first add on to the system.

-------------
D. Porter




Posted By: lurch228
Date Posted: July 26, 2016 at 9:55 AM
DEI would be Viper, Python, Clifford, and Avital all aftermarket systems made by DEI. So you won't find the orange wire on a factory system. I don't know of any OEM Ford systems that has a ground when armed.




Posted By: dporter7
Date Posted: July 26, 2016 at 5:22 PM
Oh I see. Well I was working up hill on this one then.I will need to install the rest of the after market alarm system for this piece. Thank You very much this is the best site ever.Ive gotten alot of information for this one. Thanks again!

-------------
D. Porter




Posted By: lurch228
Date Posted: July 26, 2016 at 5:56 PM
Your welcome. IF you haven't got the alarm already you can get any DEI brand as they are all the same internaly in any given generation whether it be viper clifford python avital.

DEI Cross list

You van use this link to comapre them by the internal DEI part number. Letter at the end of part number designates Branding.   

5902v = Viper
 
5902p = Python

ECT.




Posted By: lurch228
Date Posted: August 03, 2016 at 12:28 AM
You could use a latching dual coil relay to add the Ground when armed negative output to the OEM system using the lock and unlock triggers to change the relay position, and it wouldn't have any draw to drain the battery as it stays latched even when it has no power.





Print Page | Close Window