How do I wire an Ooga horn with a switch?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=141789
Printed Date: May 02, 2024 at 3:59 PM

Topic: How do I wire an Ooga horn with a switch?

Posted By: nidish
Subject: How do I wire an Ooga horn with a switch?
Date Posted: September 27, 2016 at 9:40 AM

Hey guys, so I recently bought an ooga horn off ebay. I've found a place to mount it in the engine bay. on the back of the horn, it has gove + and - termninals.

I want to install it in my car, with a switch mounted somewhere in the dashboard. How would I safely wire it? I have a 2004 Mitsubishi Lancer.

Thanks

Replies:

Posted By: howie ll
Date Posted: September 27, 2016 at 1:16 PM

Easier to relay it otherwise heavy cable required and the switch may not have the capacity.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Print Page | Close Window