Jeep Compass 2009, Avital 4103 +PK3 bypass
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=141808
Printed Date: May 15, 2024 at 8:28 AM
Topic: Jeep Compass 2009, Avital 4103 +PK3 bypass
Posted By: wenfu
Subject: Jeep Compass 2009, Avital 4103 +PK3 bypass
Date Posted: October 02, 2016 at 10:10 AM
Hi,
I connectd the wires by the installment instruction the seller sended to me. Unfortunately it still can't work. When i pushed the * button, most of the time, it can't crank the engine, sometimes it crank but less than one second engine stoppd.
I tried the Tach Learning and took several turns of loop most of the time it can succeeded to crank the engine,but next time i tried to remote start the engine,it would failed.
I tried to perform shutdown diagnostics, it show 3 flashes. I checked the tach wire have signal and I also tried to program the Engine checking option1 2 3 4 I have tried, but the problem didn't solved.
I have confused about the wire(ground when running output) ,which wire do it connect to the remote starter? Can you give me a details about it?
After all of that, is there any wrong with the bypass?
looking forward to your respond .
Replies:
Posted By: wenfu
Date Posted: October 02, 2016 at 10:13 AM
 
that are the wires installment
Posted By: lurch228
Date Posted: October 02, 2016 at 1:23 PM
Connect to the Avital 4-pin satellite harness diagram
1 BLUE STATUS OUTPUT to The PK3+ Input Blue/White.
|