2001 Sierra 2500
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=141837
Printed Date: April 27, 2024 at 12:38 PM
Topic: 2001 Sierra 2500
Posted By: ziggyb222
Subject: 2001 Sierra 2500
Date Posted: October 08, 2016 at 6:50 PM
Installed a Avital 4103 in a GMC Sierra. Done a ton of these... In remote start and with the key.... the ABS and Brake light come on after about 20 seconds of running...Ignition wires timing?????
Replies:
Posted By: beegbie
Date Posted: October 08, 2016 at 7:51 PM
Did you power up the correct accessory? Should only need one along with two ignitions. I've heard that both accessories may need to be powered up but never experienced it myself.
Posted By: ziggyb222
Date Posted: October 08, 2016 at 9:49 PM
I dont think I have ever powered up the brown acc. wire...
Posted By: lurch228
Date Posted: October 09, 2016 at 1:43 AM
ziggyb222 wrote:
Installed a Avital 4103 in a GMC Sierra. Done a ton of these... In remote start and with the key.... the ABS and Brake light come on after about 20 seconds of running...Ignition wires timing?????
It's having this issue with the key also?
Posted By: ziggyb222
Date Posted: October 09, 2016 at 7:47 AM
Yes when started with the key also. going to look at it again today...Everything is soldered also...
Posted By: ziggyb222
Date Posted: October 09, 2016 at 9:57 AM
Found the issue...Appears to have been a cold soldered joint on the primary ignition wire... Resoldered it and checked all other connections and works as it should now....Thanks for your responses!!!!
Posted By: lurch228
Date Posted: October 09, 2016 at 5:55 PM
Did the Ignition wire get cut, as a bad soldered tie wont usually case this with the key?
|