2 window modules
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=141854
Printed Date: April 28, 2024 at 4:24 AM
Topic: 2 window modules
Posted By: dman007
Subject: 2 window modules
Date Posted: October 12, 2016 at 11:11 PM
Installing 2 Dei 535ts into 4 door truck. 2005 Chevy Colorado. Do I need to run wires into every door? Is it possible to complete install just in drivers door window switch?
Looking to control all 4 windows up/down via viper alarm.
Thanks
-------------
DTS Performance
St Petersburg, FL
Replies:
Posted By: howie ll
Date Posted: October 15, 2016 at 2:03 PM
Assuming the driver's door switch is sending 12V to the other windows, you'll lose one touch up and down though and possibly the vent facility.
Plus all that extra wiring to driver's door.
Place one at each front kick panel, use the left over wires from the front to extend to the rear, much simpler less wiring to each door, go directly to the motor wires.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|