Clifnet Wizard - Valet code prompt

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=141896
Printed Date: May 04, 2024 at 9:21 PM

Topic: Clifnet Wizard - Valet code prompt

Posted By: rolnikov
Subject: Clifnet Wizard - Valet code prompt
Date Posted: October 23, 2016 at 3:27 PM

Hi,
I connect notebook to Avantguard 4 with Cliffnet cable.
Everything seems to work fine - got message about Disarmed system and ignition off. Click Continue and then I got Valet Code prompt looking like this:
posted_image

It looks strange to me. Is it normal and should I put valet code in New/Confirmation forms ?
I dont know valet code yet (just bought car with 15 year old Clifford Alarm) - going to find it out by brute force ;)

Replies:

Posted By: howie ll
Date Posted: October 24, 2016 at 9:48 AM

Just enter a new valet code.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Posted By: rolnikov
Date Posted: October 25, 2016 at 12:11 AM

Unfortunately, it doesnt work like this. Anything I put, I got message that valet code is invalid/wrong.
So I dont have current/old Valet Code, and I cant assign any new code.

I asked, becouse that windows looks strange to me - In Current Code I got XXXX, and only place I can enter anything is New/Confirm form.

Posted By: howie ll
Date Posted: October 25, 2016 at 12:54 AM

AG 4 should have the valet code as part of the serial number on the alarm CPU.
Don't throw away, it might be old but it was the best ever unit.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Posted By: rolnikov
Date Posted: October 25, 2016 at 3:58 AM

Yeah, I tried it - no luck. Below photo of my box. I guess that according to it, valet code should be 220, 22 ? it cant be 0220 becouse code cant start with 0...

posted_image

Posted By: rolnikov
Date Posted: October 25, 2016 at 4:08 AM

I tried 835 as well.

Posted By: howie ll
Date Posted: October 25, 2016 at 5:07 AM

Should be 0220. Your only other answer would be to contact DEI.
Clifford UK would have been able to help before they were swallowed by DEI.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Posted By: howie ll
Date Posted: October 25, 2016 at 5:08 AM

Just a thought, go to the valet switch, press the star button twice, the plain once. If that does anything your Valet code is 2.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Posted By: rolnikov
Date Posted: October 25, 2016 at 5:20 AM

I tried entering 0220, 220, 22 by valet switch.

back to first question - is window with valet code prompt correct ? If yes - I should guess code by entering all possibilities by windows macro.

Posted By: howie ll
Date Posted: October 25, 2016 at 8:37 AM

You must remember it's 10-15 years since I've done one ofthese and back then CliffordUK was a phone call away, I said manually enter 2. Try it.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Posted By: rolnikov
Date Posted: October 25, 2016 at 11:53 AM

Tried '2' too at very begining.