2001 Ram Sport - Viper 5806V

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=142359
Printed Date: May 03, 2024 at 3:34 AM

Topic: 2001 Ram Sport - Viper 5806V

Posted By: ifatrain
Subject: 2001 Ram Sport - Viper 5806V
Date Posted: January 02, 2017 at 10:48 PM

Could someone look this over and make sure everything is proper? I've done my best and spend quite a number of hours searching any information I could get to try and put this together, so that the install is as smooth as possible.

I'm going to be putting the Viper 5806V into my 2001 Dodge Ram 1500 Sport 5.9 V8. The truck is a Standard 2-Door, came with a factory keyless (I dont have remotes), but build sheet does not indicate a factory alarm system.

Wiring for the 01 Ram was pulled from these sources:

https://www.the12volt.com/installbay/forum_posts.asp?tid=93462
https://www.bulldogsecurity.com/bdnew/vehiclewiringdiagrams.aspx

I'm unsure about which relay set to use for the trucks lock system, could you let me know which of these two would be proper? :

https://www.the12volt.com/12voltimages/5wap.gif
https://www.the12volt.com/installbay/uploads/lock_diagram.jpg

If I left anything out or can assist you, feel free to ask me any questions and I will answer them as soon as I am able to! I wanted to note that I DO have the full install manual for the 5X06 family that includes detailed info about each wire!

Thanks for your time :D

Attached should be a .png of the wiring list for the system. Please let me know if it is proper, and if not what to fix.
posted_image

Replies:

Posted By: scottgardner795
Date Posted: January 04, 2017 at 9:31 PM

5 wire positive setup for unlock, straight positive output for lock. Two relays needed. Very unique door lock setup.

Posted By: ifatrain
Date Posted: January 05, 2017 at 12:25 AM

scottgardner795 wrote:

5 wire positive setup for unlock, straight positive output for lock. Two relays needed. Very unique door lock setup.

Could you be more specific/descriptive with your explanation, and do you have any information with regards to the rest of the wiring?

Is this what you are referring to for the 5 Wire? https://www.the12volt.com/12voltimages/5wap.gif

Do I simply add that into the circuit and it will lock/unlock properly?

Posted By: ifatrain
Date Posted: January 05, 2017 at 10:44 PM

Quick Addendum: Ignore the 30A marking in notes on the fused 12V stuff, I just got the alarm in the mail today and it turns out they come fused from the factory, which is really nice :D

Posted By: kreg357
Date Posted: January 08, 2017 at 9:14 PM

For the door locks, get a Directed 451M Door Lock Module. The vehicle Unlock goes open to unlock while the vehicle Lock
wire needs a (+) signal to lock.

RS 9 RED / White goes to +12V constant.

Everything else looks OK.

-------------
Soldering is fun!