2004 Trailblazer stand alone bypass module
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=142421
Printed Date: April 30, 2024 at 9:29 PM
Topic: 2004 Trailblazer stand alone bypass module
Posted By: timpic
Subject: 2004 Trailblazer stand alone bypass module
Date Posted: January 14, 2017 at 3:30 PM
Hello, I want to wire my fortin/crimestopper Passlock-sl2-v2 as a stand alone no remote start, just a little confused because all instructions i find are for use with a remote start.
here's what i think I think i just have to do
ground out the (blue) while running wire
yellow ignition wire would go to my pink ignition in the harness
Red to +batt
black to -ground
most instructions say to connect BCM data on module(orange) to violet Data on OBDII port?
but the fortin instructions show ORANGE / black Data In and orange data from bcm connecting, both to yellow from the key switch
and black ground specifically to the negative wire coming from key switch
So should i forget about the Violet wire on the Diagnostic port?
ty
Replies:
Posted By: kreg357
Date Posted: January 14, 2017 at 8:29 PM
You're confused? I'm really confused. What exactly are you trying to do?
The Fortin PASSLOCK-SL2 v.2 bypass module is a resistance based bypass module for Passlock2. I can't find any PASSLOCK-SL2 v.2 instructions that mention the use of the Violet wire at Pin 2 of the OBD2 connector. That connection is usually used by Data style bypass modules.
------------- Soldering is fun!
Posted By: brownsfan1
Date Posted: January 16, 2017 at 11:38 AM
As a stand alone to what? What are you trying to accomplish here? That part is designed to work with a remote start system.
|