Programming remotes for prestige PE1B RF
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=142422
Printed Date: April 29, 2024 at 9:16 AM
Topic: Programming remotes for prestige PE1B RF
Posted By: mpe235
Subject: Programming remotes for prestige PE1B RF
Date Posted: January 14, 2017 at 5:12 PM
I am in the process of installing an FLCAN in a push to start 2016 Nissan Rogue. I have a prestige PE1B Rf kit and avxdata converter to extend the range. I am looking for instructions to program the remotes to the system. I usually use fortin evo all and those are done through the module.
-------------
Nissan Master Tech.
Replies:
Posted By: lectricguy
Date Posted: January 19, 2017 at 9:01 PM
The AVX data should plug into the FlLCAN, the antenna cable should plug into the AVX Data and be mounted on the windshield.
Turn the ignition to "on", press the button on the antenna 3 times. You should hear a single horn honk/light flash, telling you that you are in program mode. Press the button on the 1 button transmitter you wish to program, and you will hear a confirmation honk. Turn key off, system will honk (1 short honk, 1 long honk) within 20 seconds or so indicating that you are out of program mode. You should be all set.
-------------
Lectric Guy
Posted By: mpe235
Date Posted: January 20, 2017 at 3:48 PM
Thanks. That worked.
-------------
Nissan Master Tech.
Posted By: lectricguy
Date Posted: January 20, 2017 at 8:33 PM
Excellent. Glad to help!
-------------
Lectric Guy
|