Avital 4105 & DBALL2 2010 Outback problems.
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=142427
Printed Date: May 02, 2024 at 6:52 AM
Topic: Avital 4105 & DBALL2 2010 Outback problems.
Posted By: mhcrra1
Subject: Avital 4105 & DBALL2 2010 Outback problems.
Date Posted: January 15, 2017 at 9:36 AM
First off, This site ROCKS! I have more experience with the Omega products than DBALL....so this is probably something silly.
I just installed an Avital 4105L and DBALL2 into a friends 2010 Subaru Outback. Followed the instructions for remote start and DBALL.....just trying to test things now before I button it all up and am having trouble.
One thing I can't figure out is the SECOND STARTER wire for the remote start...according to the install type it should be connected but I have no idea which wire on the RS I should connect...I don't see anything in the chart for the 4105 that says STARTER 2.
Second, when I connect the DBALL2 is NEVER goes to solid red to start the programming. It stays flashing RED / ORANGE / GREEN no matter what I do. I can't find anything anywhere that says what this means...I assume there is something not connected correctly???
The only thing I haven't connected per the instructions are the SECURITY WARNING LIGHT relay connection for the DBALL (didn't think that was required)
The KEYSENSE wire for the DBALL
The SECOND STARTER wire for the RS.
Any ideas would be appreciated.....I am banging my head against the wall here.
Thanks everyone
Replies:
Posted By: mhcrra1
Date Posted: January 15, 2017 at 6:27 PM
GOT IT!!!!
Re flashed the DBALL2, installed it and voila it went right into program mode!
|