flashlogic and avxdata prestige remote st
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=142446
Printed Date: June 11, 2024 at 3:16 PM
Topic: flashlogic and avxdata prestige remote st
Posted By: dinothedog
Subject: flashlogic and avxdata prestige remote st
Date Posted: January 19, 2017 at 2:44 PM
I have a 06 JEEP GRAND CHEROKEE SRT8. I installed flashlogic ch5 remote start and is working, so then i purchased a prestige extended range and avxdata and i did flash the flashlogic module for the extended prestige remote. I cant get the prestige remote to work, is there a certain way to add the the avxdata and the prestige remote
Replies:
Posted By: lectricguy
Date Posted: January 19, 2017 at 8:56 PM
The AVX data should plug into the Flashlogic, the antenna cable should plug into the AVX Data and be mounted on the windshield.
Turn the ignition to "on", press the button on the antenna 3 times. You should hear a single horn honk/light flash, telling you that you are in program mode. Press the lock button on the transmitter once, and you will hear a confirmation honk. Turn key off, system will honk (1 short, 1 long honk) within 20 seconds or so indicating that you are out of program mode. You should be all set.
-------------
Lectric Guy
Posted By: dinothedog
Date Posted: January 20, 2017 at 7:51 PM
Lectricguy you rock that was it, if your ever in ohio beers are on me THANK YOU!
Posted By: lectricguy
Date Posted: January 20, 2017 at 8:34 PM
Fantastic! Happy to help out...Cheers!
-------------
Lectric Guy
|