2010 Ford Fusion, Viper 4806 and DBALL2

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=142453
Printed Date: April 29, 2024 at 10:26 AM

Topic: 2010 Ford Fusion, Viper 4806 and DBALL2

Posted By: chrisjcline
Subject: 2010 Ford Fusion, Viper 4806 and DBALL2
Date Posted: January 20, 2017 at 6:31 PM

I am in the process of installing a Viper 4806V D2D to DBALL2, and T-Harness.

DBALL2 has the latest FORD firmware with-out OEM Alarm. The trouble I am having is I am unsure if I need to have 2 Keys to program the DBALL2 even though it is D2D to the Viper?

Replies:

Posted By: silvercivicsir
Date Posted: January 20, 2017 at 9:46 PM

should only be the 40 bit key.. should be able to use key2go and use only one key to program

Posted By: chrisjcline
Date Posted: January 21, 2017 at 2:37 PM

I was afraid you were going to say that. I'm not a dealer so I do not have access to the Key2Go feature. I was thinking about switching out the DBALL2 with a PKALL. Would that work?

Print Page | Close Window