Print Page | Close Window

2004 F150 no crank factory code alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=142639
Printed Date: May 04, 2024 at 1:23 AM


Topic: 2004 F150 no crank factory code alarm

Posted By: prostreet68
Subject: 2004 F150 no crank factory code alarm
Date Posted: February 20, 2017 at 5:00 PM

I emailed got an 04 F150 with the factory Code Alarm remote start. 2W7J19G367AA
The four button fob works fine to lock and unlock the doors. When I hit the remote start it powers up like it is going to start and then powers back down without cranking. It repeats this five times before it gives up. It doesn't beep the horn either so I've got no beep codes.
Anybody familiar with these old Code Alarms know what is going on? Install manual wasn't any help.



Replies:

Posted By: chev104275
Date Posted: February 20, 2017 at 5:35 PM
It's been a while but I still have all my papers on them. What does your anti theft light do when you try to start it ? My guess is it flashes fast which means the truck isn't seeing a valid key code.

-------------
If i Can't Install it    I Don't need it   Joe




Posted By: prostreet68
Date Posted: February 20, 2017 at 7:18 PM
Yeah. It's something with the PATS. It will start if I hold a key up to the ignition. It blinks fast. I can't seem to get it to program.
Did the whole turn the key to on. Wait for the light to go out. Turn the second key to on. Wait for it to go out. Push start. Light starts blinking fast.




Posted By: chev104275
Date Posted: February 20, 2017 at 7:42 PM
First are both your keys original to the truck. Non cloned ?

Second what bypass is in the truck ?

I'm guessing its a 7L2Z-19G365-AA. If it is the ring that goes around the ingition fails in those. There is an updated part 8L3Z-19G365-BA it plugs into the same port as the 7L2Z and programs the same way

-------------
If i Can't Install it    I Don't need it   Joe




Posted By: prostreet68
Date Posted: February 20, 2017 at 8:04 PM
As far as I know it's the original keys.
1L2Z-19G365-AB




Posted By: chev104275
Date Posted: February 21, 2017 at 4:39 AM
OK you can still use the 8L3Z-19G365-BA in place of that one

-------------
If i Can't Install it    I Don't need it   Joe





Print Page | Close Window