Print Page | Close Window

viper 4706 wiring 2001 silverado?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=142831
Printed Date: April 28, 2024 at 12:26 AM


Topic: viper 4706 wiring 2001 silverado?

Posted By: lime4x4
Subject: viper 4706 wiring 2001 silverado?
Date Posted: April 04, 2017 at 9:19 AM

Will be installing a viper 4706 remote start on a 2001 silverado with a diesel engine. Does anyone by chance have a wiring diagram as to what wires from the viper go where on the vehicle? Esp the 8 pin connector



Replies:

Posted By: kreg357
Date Posted: April 04, 2017 at 9:46 PM
Should be covered in this Pictorial :
https://www.the12volt.com/installbay/forum_posts.asp?tid=135786

-------------
Soldering is fun!



Posted By: lime4x4
Date Posted: April 18, 2017 at 7:15 PM
I got everything hooked up. Can the pink/black wire from the viper main 8 pin harness be used to power the brown accessory wire?



Posted By: kreg357
Date Posted: April 19, 2017 at 6:33 PM
No. If you wish to power the Brown ACC2 wire you will need a 30/40 Amp SPDT relay with harness and inline fuse. You will use the Vipers thin Orange (-) Accessory Output wire to control the relay. I believe the relay wiring is also mentioned in the Pictorial.

-------------
Soldering is fun!


Print Page | Close Window