Clifford G5 only arming/disarming
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=142839
Printed Date: May 05, 2024 at 7:03 AM
Topic: Clifford G5 only arming/disarming
Posted By: ej208
Subject: Clifford G5 only arming/disarming
Date Posted: April 07, 2017 at 5:48 AM
So I have a 1999 Subaru Legacy B4 RSK with a Clifford G5 and intellistart 4. The remotestart wasn't working (flashed blinkers only once) so I started looking in to the wires and long story short the black/green manual mode wire wasn't grounded.
Yesterday I got the remotestart working (kinda). It started the car but after 10 seconds or so it killed it.. The problem was the tach output which wasn't wired in.
So today I wired the tach fire straight to the ecu, started the car with a key, programmed the tach by valet buttons and the alarm accepted that (flashed blinkers twice).
The problem is that after I killed the car and tried to remotestart, it did nothing. I tried othet buttons in the remote also and only the arming/disarming button seems to be doing something.. I know that the remote works because the blue light in the remote lights up when I press any button.
Replies:
Posted By: ej208
Date Posted: April 08, 2017 at 8:53 AM
Okay, I got it working.. Had to reset the whole thing and relearn the remote. The intellistart just isn't working correctly. I have the tach wire wired to my ecu's tach wire but in automatic mode it starts the car and kills it in 2 seconds. In manual mode it wont even start the car. Just flashes the blinkers once..
However, If I have the intellistart in automatic mode and start up the car manuaally, by pressing the star button in the remote, it allows me to take the keys out but wont shutdown the car after I lock the doors. I have to shutdown the car manually by pressing the star button.
|