Print Page | Close Window

EVO-CAN’s D2D not working with Viper now?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=142903
Printed Date: April 27, 2024 at 5:56 PM


Topic: EVO-CAN’s D2D not working with Viper now?

Posted By: equate
Subject: EVO-CAN’s D2D not working with Viper now?
Date Posted: April 24, 2017 at 11:59 AM

There is 2008 BMW 523LI. Customer has Viper5704v, EVOCAN, int bmw2.
I config EVOCAN for D2D(F3) with newest firmware, other options are default.
EVOCAN and 5704V linked by 4p data wire. All communication between them are down. I try trigger the purple of EVOCAN to GND, door is locked. That means EVOCAN communicates with Canbus well. But I press lock on remote, 5704's LED is on, but door not response. seems data is not forwared to evocan. or evocan reject them. Then I change to DLPK, everything works.

Also, the INT BMW2 's D2D is not working either. I have to make analog connection to 5704.

Anything else should I do to make D2D work?





Print Page | Close Window