508d and 504 together install
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=142913
Printed Date: May 04, 2024 at 4:39 PM
Topic: 508d and 504 together install
Posted By: fpandaoz
Subject: 508d and 504 together install
Date Posted: April 26, 2017 at 4:23 PM
Hello !
I have clifford 3305x and 508d connected in the optional port. I want to install also 504d. What is the best way to do it ? Can this port to power 2 sensors or I will have problem? If yes we are ok , if no I will take power from pin harness . Also these two sensors have 2 cables blue - green (warn -full trigger). On the 504d is see that the one side has looped green with blue, and the other side has green on the air , and blue - red - black. How I will make the installation to work correct please?
-------------
Be happy and stay tuned every day !
Replies:
Posted By: fpandaoz
Date Posted: April 27, 2017 at 7:27 AM
anyone help???
-------------
Be happy and stay tuned every day !
Posted By: fpandaoz
Date Posted: May 02, 2017 at 8:38 AM
finaly I made it my self with schematic diagramm. From the port wich I have the 508d , I took 12v , ground and green "warn" trigger with 2 diodes one for each sensor , and for alarm I took blue cable from main brain wich I was used to hood pin switch ,also with 2 diodes and Its working great .
-------------
Be happy and stay tuned every day !
|