Ford focus keyless entry problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=143131
Printed Date: May 02, 2024 at 4:48 PM

Topic: Ford focus keyless entry problem

Posted By: edwardoo
Subject: Ford focus keyless entry problem
Date Posted: July 07, 2017 at 4:10 PM

Hello to everyone.

I have problem with wiring keyless entry for my focus, the problem is i can't find "power unlock wire" i've test all black/yellow wires and nothing, power lock wire i found behind drivers kick panel under the carpet and its not black/red, mostly like black/orange and locking works fine. What can be the problem ? Here's some pictuers.

Power lock wire location under carpet behind drivers kick panel
posted_image

Central locking unit
posted_image

Passenger kick panel
posted_image

Drivers kick panel
posted_image

Keyless entry

posted_image

And as i said i've tested all Black/Yellow wire from drivers side

I appreciate every help
Thank You..

Replies:

Posted By: i am an idiot
Date Posted: July 07, 2017 at 5:14 PM

Year?

Posted By: edwardoo
Date Posted: July 07, 2017 at 5:15 PM

2000

Posted By: i am an idiot
Date Posted: July 07, 2017 at 5:49 PM

Is it not in the harness that goes into the door at the drivers kick panel?

Posted By: edwardoo
Date Posted: July 07, 2017 at 5:52 PM

Heres pictures from door

posted_image

Posted By: i am an idiot
Date Posted: July 07, 2017 at 9:27 PM

There has to be another plug going into the door. Squeeze the boot going from door jamb to the door, and see if you can figure out how many wires are in it.

Posted By: edwardoo
Date Posted: July 08, 2017 at 5:20 AM

Wires from door boot

posted_image

Posted By: i am an idiot
Date Posted: July 08, 2017 at 3:55 PM

Do you have a multimeter? If so, set it to dc volts or the 20 volt dc scale. Press and hold the red meter lead to positive voltage somewhere. Then probe each of those wires while having someone unlock the door with the key. When you are on the right wire the meter should read 12 volts while the key is in the unlock position.