Compustar CM7000 Options Programming?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=143135
Printed Date: April 29, 2024 at 6:12 PM
Topic: Compustar CM7000 Options Programming?
Posted By: darrenz
Subject: Compustar CM7000 Options Programming?
Date Posted: July 08, 2017 at 7:46 PM
I put this model in my truck years ago and now just put one in gf truck but for the life of me I can't program options.remotes are programmed, I'm following instructions....I'm trying to go in group 2 but when tap key button after 3rd time ito flashes like 3 times and that's it....it don't really seem like I'm in options as if I just sit here I don't get no time out exit flashes. Any ideas.
Replies:
Posted By: darrenz
Date Posted: July 08, 2017 at 7:51 PM
Do i need key or anything on?book says nothing but what buttons to press
Posted By: ajent
Date Posted: July 14, 2017 at 8:25 PM
You don't need the key on. I do it with just vehicle unlocked. Hold the 2 buttons for 3 seconds until flash/chirp then again 3 seconds until flash/chirp, then push the selection button the # of times for that menu choice. Wait for flash for each time you press button, then wait for car to flash or chirp the amount will be same as menu you chose.
(Menu 3-7 would flash lights 7 times) after that push your selection. Car will chirp/flash the # you choose. (Option 2 would flash lights twice)
Posted By: dswift
Date Posted: July 18, 2017 at 6:09 PM
What option are you trying to turn ON and what remote do you have?
-------------
"dont ground out!"
|