viper 4706 install, 2005 gmc 2500hd

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=143158
Printed Date: May 01, 2024 at 8:09 PM

Topic: viper 4706 install, 2005 gmc 2500hd

Posted By: signalstan
Subject: viper 4706 install, 2005 gmc 2500hd
Date Posted: July 09, 2017 at 12:18 PM

hey folks I could use some help I am replacing an old avital remote start/alarm with a new viper 4706v system the avital was working. I hooked up all the wires except one for the neutral safety switch I could not find a wire for this on the viper system the alarm works now it locks and unlocks the doors flashes the lights but wont start the truck (2005 gmc 2500hd) I dont know if the wire is the issue or the unit needs to be programed with a bit writer

Replies:

Posted By: og2tone
Date Posted: July 09, 2017 at 3:27 PM

neutral wire must be grounded if the vehicle is an automatic transmission. The brain must be set to automatic transmission.

-------------
john olivares

Print Page | Close Window