Avital 5305 door lock outputs quit working
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=143396
Printed Date: April 29, 2024 at 5:50 AM
Topic: Avital 5305 door lock outputs quit working
Posted By: scottjvincent
Subject: Avital 5305 door lock outputs quit working
Date Posted: July 24, 2017 at 3:55 PM
So i installed my avital 5305 in my civic With 2 wire door lock actuators.. neg lock outputs going to the negative side of relays.... Everything worked great for a month then doors quit locking/unlocking.... So i checked the wiring... And the car side of working is perfect...i ground relay and doors lock and unlock as they should..... BUT the alarm isn't outputting a neg signal any more... It's more like 5v instead of a neg signal.....
I tested relays before hand and they pulled 125mw turned on... So that's well within the 500mw limit...
Every other output works perfect... JUST the door lock signals quit working????
I don't get it.... What did i do wrong?
Is this a common problem with alarms?
I got the alarm off Amazon... Doubt they will allow a refund now....
Let me know what u guys think...
Thanks
Scott v.
-------------
Scott v
Replies:
Posted By: tonanzith
Date Posted: July 25, 2017 at 8:32 AM
check your grounds. if all is good its a bunk alarm. you could tru using the factory alarm arm and disarm wires instead if those still function.
-------------
Gary Sather
Posted By: scottjvincent
Date Posted: July 31, 2017 at 11:22 AM
Hey GOOD thinking with the factory alarm disarm outputs... Not sure if they still work... I'll check...... Good idea..
Thanks
Scott v.
-------------
Scott v
|