Print Page | Close Window

Remote Text Programming

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145015
Printed Date: June 05, 2024 at 12:09 AM


Topic: Remote Text Programming

Posted By: dman007
Subject: Remote Text Programming
Date Posted: December 06, 2018 at 12:37 PM

Viper 5706V installed with 508D Proximity Sensor plugged into port 2. Bitwriter Programmed "Zone 4 Sensor Type" Field Disturbance. With shock sensor unplugged, when a warn away is triggered for the proximity sensor. Remote states Sensor 2 Warn away with shock hammer icon. But when a full alarm is triggered by the proximity sensor, the correct "Field Disturbance" text comes on. How do I get the Responder LC remote to display the correct icon and text for the proximity sensor.

Thanks

-------------
DTS Performance
St Petersburg, FL


Print Page | Close Window