2018 Toyota Avalon PTS Remote Start Install
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145630
Printed Date: May 29, 2024 at 5:23 AM
Topic: 2018 Toyota Avalon PTS Remote Start Install
Posted By: mcgrathe
Subject: 2018 Toyota Avalon PTS Remote Start Install
Date Posted: September 11, 2019 at 6:22 PM
Hello all. Would anyone have the diagram to install an iDatalink ADS-ALCA and viper 4606V D2D into a 2018 smart key Push Button Start Toyota Avalon. the factory remote range is horrible so i want to use my 4606V and program the 2 way remote i have.
Thank you
-------------
Eric M
Replies:
Posted By: cpalmer
Date Posted: September 11, 2019 at 6:49 PM
Should be able to find what you need on the iDatalink website. Do you have an XL202 from DEI to go with that?
Posted By: mcgrathe
Date Posted: September 11, 2019 at 7:20 PM
Hmm. No not familiar with the XL202. In my 15 pilot I did it all with a 4606V and programmed a 7756v lcd remote to it and the ALCA d2d. Can I use just an Alca and an xl202 with 2 way lcd remote and eliminate 4606v alarm?
-------------
Eric M
Posted By: mgoetz74
Date Posted: September 12, 2019 at 1:20 PM
https://images.idatalink.com/corporate/Content/Manuals/DL-TL6/ADS-AL(DL)-TL6-EN_20190726.pdf
why not just use the alca and do RSR and add on a 2 way compsutar remote pack? The viper remote start is over kill considering there is no take over for Toyotas so when you open the door the RS will shut down and you have to restart the car. $100 for alca and $100 for compustar remote pack (prime r3 or prime g15). Would do the prime r3 since you really only need remote start since the car unlock when you walk up to the car with the prox key
RSR-
https://images.idatalink.com/corporate/Content/Manuals/RS-TL6/OEM-AL(RS)-TL6-[ADS-ALCA]-EN_20190726.pdf
-------------
33 years as a installer now just a retired old guy. Favorite thing to install/topic are remote starts/car alarms. Stop using test lights!!!
Posted By: mcgrathe
Date Posted: September 12, 2019 at 4:21 PM
I already have all the viper stuff but yes what you suggested would work to. I’m curious if an XL202 will communicate with the ALCA? I Also have a Directed DB3 that I can get flashed. Would that most likely be the best option used with an XL202?
Thank you
-------------
Eric M
Posted By: silvercivicsir
Date Posted: September 15, 2019 at 4:53 PM
xl202 will work with a Dball2 or Dball 3
|